Part Wedge/ru

Призма

Спираль винтовая

Верстак Part

Описание

Применение

See Part Primitives.

Example

A Part Wedge object created with the scripting example below is shown here.

Notes

• The values of the coordinates of the wedge must be such that a valid solid can be create. This means that the front and rear base shapes can both be single edges, but not if they are parallel. And if one of the base shapes is a vertex the other shape must be a rectangular face.

Properties

See also: Property editor.

A Part Wedge object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:

Data

Attachment

The object has the same attachment properties as a Part Part2DObject.

Wedge

• ДанныеXmin (Distance): The lowest X coordinate of the front face of the wedge. The default is 0mm.
• ДанныеYmin (Distance): The Y coordinate of the front face of the wedge. The default is 0mm.
• ДанныеZmin (Distance): The lowest Z coordinate of the front face of the wedge. The default is 0mm.
• ДанныеX2min (Distance): The lowest X coordinate of the rear face of the wedge. The default is 2mm.
• ДанныеZ2min (Distance): The lowest Z coordinate of the rear face of the wedge. The default is 2mm.
• ДанныеXmax (Distance): The highest X coordinate of the front face of the wedge. The default is 10mm.
• ДанныеYmax (Distance): The Y coordinate of the rear face of the wedge. The default is 10mm.
• ДанныеZmax (Distance): The highest Z coordinate of the front face of the wedge. The default is 10mm.
• ДанныеX2max (Distance): The highest X coordinate of the rear face of the wedge. The default is 8mm.
• ДанныеZ2max (Distance): The highest Z coordinate of the rear face of the wedge. The default is 8mm.

Scripting

See also: Autogenerated API documentation, Part scripting and FreeCAD Scripting Basics.

A Part Wedge can be created with the addObject() method of the document:

wedge = FreeCAD.ActiveDocument.addObject("Part::Wedge", "myWedge")

• Where "myWedge" is the name for the object.
• The function returns the newly created object.

Example:

import FreeCAD as App

doc = App.activeDocument()

wedge = doc.addObject("Part::Wedge", "myWedge")
wedge.Xmin = 1
wedge.Ymin = 2
wedge.Zmin = 3
wedge.X2min = 4
wedge.Z2min = 6
wedge.Xmax = 15
wedge.Ymax = 20
wedge.Zmax = 55
wedge.X2max = 10
wedge.Z2max = 12
wedge.Placement = App.Placement(App.Vector(1, 2, 3), App.Rotation(75, 60, 30))

doc.recompute()

Призма

Спираль винтовая

Верстак Part

Part

• Примитивы: Куб(Параллелограмм), Конус, Цилиндр, Сфера, Тор, Полый цилиндр,Примитивы, Связующие формы

---

• Создание и правка: Выдавливание, Построение фигуры вращения, Отражение, Скругление, Фаска, Создать плоскость из граней, Ruled Surface, Профиль, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Создать полый объект, Projection on surface, Прикрепление

---

• Булевы операции: Соединить, Разорвать связь, Compound Filter, Булевы операции, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR

---

• Измерительные: Measure Linear, Measure Angular, Measure Refresh, Clear All, Toggle All, Toggle 3D, Toggle Delta

---

• Другие инструменты: Импорт, Экспорт, Box selection, Shape from Mesh, Points from mesh, Преобразовать в твердое тело, Reverse shapes, Create simple copy, Create transformed copy, Create shape element copy, Refine shape, Check geometry, Defeaturing, Appearance, Set colors

Документация пользователя

• Начинающим
• Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
• Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования

---

• Помощь: Учебники, Видео учебники
• Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework

---

• Addons: Менеджер дополнений, Внешние верстаки, Cкрипты и макросы

---

• Hubs: Уголок пользователя, Уголок опытных пользователей, Уголок разработчиков